Arkansas Lamination Products & Services, Inc.
The PRO-LAM 1200 HP POCKET ROCKET is a 12" wide heated roll laminator with speeds of up to 15 feet per minute. This Pro-Lam laminator features side trimmers, and fast heat up of about 4 minutes. Includes Stand with 3-inch supply mandrels. This 12” wide machine is possibly the fastest 110v 12” heated roll laminator in existence. While producing a superb finish and edge seal it is capable of speeds up to 17 fpm and can laminate 3 mil. material more than 10 fpm. It can use films from 1 to 15 mils thick and will laminate materials, such as foam board to 1/4” thick.
With a set up time of a couple of minutes and a thru-put capability more than 1000 fph extremely profitable productivity can be expected. The Pro-Lam 1200 laminator is simply a 12" wide high performance commercial laminating machine. This machine fills the gap between "toys" and expensive commercial laminators, while sacrificing nothing in quality and performance. This is truly a professional machine in every aspect. And remember, simply turn it on when you need--warm up time is about four minutes on this little guy. Also remember that the vast majority of all printing, copying, and duplicating machinery does not process output that exceeds 12” in one dimension---and most laminating films sold are less than 12” in width as well.
Key Features:
MADE IN THE USA
your products delivered on time and cost-effectively is important to us! Check out our shipping, delivery and returns policies here.
Laminating Width: |
4" - 12" |
Speed: |
Max Mechanical Speed: 18 fpm Maximum Sustained Lamination Speed: 1.5 Mil @ 275 degrees 15-18 fpm 3 Mil @250 Degrees 8 fpm |
Laminate: |
Polyester, Polypropylene, Nylon, vinyl, and other plastics - Thermal or Cold |
Max Film Thickness: |
10.0 Mil + |
Max Substrate Thickness: |
.250 |
Cooling Fans: |
2 @ 110 CFM ea. |
Warm Up Time: |
Less than 5 Minutes |
Max Film Roll Dia. 1.5mil: |
w/o stand 6", with stand 11" |
Stand: |
Standard, 3" Mandrels Included |
Gapable Rolls: |
Yes-Front Heat and Rear Pull Rollers |
Temp Cont.: |
Solid State - Digital Readout 2 degree hysteresis |
Motor / Speed Control: |
DC High Torque Gear Motor / Solid State Variable, Both Air Cooled |
Slitters: |
2 Micro-Adjustable Included |
Heated Roll Watts: |
850 ea 1,700 combined, 5803 BTU's |
Electrical Requirements: |
120 Volt 60 Hz 16 Amps/1,900 Watts / Dedicated 20 Amp Circuit |
Dimensions: |
23"W x 20"D 16"H -w/o stand 40"H-w/ stand |
Shipping Dimensions 2 Packages: |
Laminator 18" x 28" x 20" / Stand 23" x 33" x 8" |
Weight: |
Laminator and Stand 115 lbs |
Shipping Weight: |
Laminator 67# Stand 62# |
Getting your products delivered on time and cost-effectively is important to us! Check out our shipping, delivery and returns policies here.
Quality laminating services and products since 1983